Search results

Jump to: navigation, search
  • *[[XT Motherboards | XT]] / [[AT Motherboards | AT]] / [[386 Motherboards | 386]] ([[386 Chipsets | 386 Chipsets]] ) == Motherboard form factors ==
    797 bytes (80 words) - 22:11, 4 February 2016
  • ...inal P5's 5.0v. This was a die shrink revision of the Pentium and operated at 75-120MHz with a bus speed of 50MHz, 60MHz or 66MHz. Socket 5 motherboards are built to the AT specification, and typically use PCI and ISA slots. Some with OPTi chipset
    8 KB (1,304 words) - 15:49, 29 March 2022
  • ...e worst case, running 8/16-bit code, the PPro can be slower than a Pentium at the same clock speed. In the best case with 32-bit code or heavy FPU operat ...n out of spec 89MHz due to the lack of 1/2 FSB/AGP divider. PCI can remain at 33MHz with proper BIOS configuration.
    22 KB (3,456 words) - 10:00, 17 December 2020
  • ...t 2 ZIF sockets were made (Socket 2 usually came in a High Insertion Force form). Socket 3 was also the first CPU socket to come with tabs on it's sides fo ...100MHz though 120MHz and 133MHz samples exist) and the AMD 5x86 (which ran at 133MHz though 150MHz and 160MHz examples exist). It offers good flexibility
    7 KB (1,113 words) - 08:21, 11 October 2020
  • *[[AT form factor|AT form factor explained]]
    1,009 bytes (147 words) - 08:51, 19 November 2020
  • ! Form Factor: ...i>(no)</i> || <i>(yes)</i> || <i>(no)</i> || Might be a 40MHz part running at 51.9MHz, manual is unclear. Upgradeable to a 486SLC @ 33MHz
    24 KB (3,219 words) - 15:50, 30 May 2018
  • !Manufacturer!!Motherboard!!Form <br/>Factor!!Chipset!!Memory type!!ISA <br/>slots!!AGP <br/>slot!!PCI <br/>slots!!FSB S |Achitec||[http://www.win3x.org/uh19/motherboard/show/242 ACHI-156]||AT||VIA Apollo VP3||FPM/EDO+SDRAM||{{yes|3}}||{{yes|2x}}||{{yes|3}}||60/66/75/
    21 KB (2,855 words) - 12:11, 19 December 2020
  • | Compatible with = [[Compatible with::AT]] | Connectors = [[Has connector::AT Keyboard]]
    2 KB (273 words) - 19:49, 21 April 2016
  • | Form factor = ATX ...very small number of Socket 7 boards in the ATX form factor, as most were AT.
    2 KB (320 words) - 12:13, 20 March 2016
  • ...s compatibility::RS232]], [[Has compatibility::LPT]], [[Has compatibility::AT Keyboard]] ...s = [[Has connector::RS232/DB9]], [[Has connector::LPT]], [[Has connector::AT Keyboard]]
    4 KB (623 words) - 16:59, 18 August 2021
  • | Compatible with = [[Compatible with::AT]] | Connectors = [[Has connector::AT Keyboard]]
    2 KB (325 words) - 00:27, 20 April 2020
  • | Compatible with = [[Compatible with::AT]] | Form factor = ISA/16-bit
    3 KB (485 words) - 23:31, 26 November 2016
  • | Compatible with = [[Compatible with::AT]] | Connectors = [[Has connector::AT Keyboard]]
    2 KB (312 words) - 18:25, 11 February 2017
  • * '''[[Allows value::AT]]''' - full-size AT * '''[[Allows value::Baby AT]]''' - small AT
    562 bytes (96 words) - 13:38, 29 January 2017
  • | Form factor = ATX ...of it too. It supports FSB speeds of 50, 55, 60 and 66MHz, but unlike its AT sister, there are no settings for higher speeds due to the ICS9159M PLL not
    4 KB (554 words) - 09:06, 6 February 2018
  • ...or 16bit ISA controllers, connects IDE storage devices directly to the ISA/AT bus * Operated at 33MHz for significant performance increases
    14 KB (2,143 words) - 03:42, 2 March 2023
\n