Template:Device Infobox/Ethernet

From Vogons Wiki
Revision as of 18:06, 13 February 2016 by Malvineous (Talk | contribs) (Move code here from Ethernet Infobox)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Device Infobox/Ethernet
There is no image of this device — upload one!
Bus type Unknown
Bus width Unknown
Bus speed Unknown
8-bit ISA compatible? Unknown
PCI 5V tolerant? Unknown
PCI 3.3V tolerant?
Manufacturer Unknown
Chipset Unknown
Connectors Unknown
Requires -5VDC? Unknown
Requires -12VDC? Unknown
Config method Unknown
Boot ROM Unknown type, write ability unknown
Driver Missing download URL

This template is used to populate the Device Infobox with information about a floppy drive. See Accton EN1640 for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.

Valid parameters and examples specific to this infobox are:

Parameter Meaning
Is ROM socketed = Value Boolean value indicating whether there is a ROM socket or not. Yes if there is a socket for a boot ROM, or No if there is no boot ROM socket, or the boot ROM chip is soldered onto the PCB (typical for flash ROM chips).
ROM type = Value Text value for the type of ROM/EEPROM/Flash chip. One of:
  • None - no ROM chip is present
  • 28-pin JEDEC - standard byte-wide 28-pin ROM/PROM
  • 32-pin JEDEC - standard 32-pin EEPROM/flash chip
  • PLCC32 - 32-pin PLCC flash chip
  • TSOP40 - 40-pin TSOP package, usually flash memory

Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead.

Is ROM writable = Value Boolean value indicating whether the ROM can be reflashed by the target system. Yes if the card can program the ROM itself, or No if the card has no ROM programming capability.

Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").