Difference between revisions of "Pine PT-602A"

From Vogons Wiki
Jump to: navigation, search
m (MFM -> ST-506)
(Update infobox)
 
Line 1: Line 1:
{{SuperIO Infobox
+
{{Device Infobox/Begin
 
  | Bus type = ISA
 
  | Bus type = ISA
 
  | Bus width = 8-bit
 
  | Bus width = 8-bit
 
  | Bus speed = 8 MHz
 
  | Bus speed = 8 MHz
 
  | Manufacturer =  
 
  | Manufacturer =  
| Chipset = W86C450/W86C456A
 
 
  | Compatible with = [[Has compatibility::RS232]], [[Has compatibility::LPT]], [[Has compatibility::Gameport]], [[Has compatibility::Pine PT-602A]]
 
  | Compatible with = [[Has compatibility::RS232]], [[Has compatibility::LPT]], [[Has compatibility::Gameport]], [[Has compatibility::Pine PT-602A]]
 
  | Connectors = [[Has connector::Gameport]], [[Has connector::LPT]] <!-- Other connectors aren't shipped with the card so aren't included -->
 
  | Connectors = [[Has connector::Gameport]], [[Has connector::LPT]] <!-- Other connectors aren't shipped with the card so aren't included -->
  | ROM type = None
+
  | Requires -5VDC = No
 +
| Requires -12VDC = Yes
 +
| Config = [[Config method::Jumpers]]
 +
}}
 +
{{Device Infobox/IO
 
  | Serial ports = 2
 
  | Serial ports = 2
 +
| UART = 8250  <!-- W86C450 datasheet says it's functionally equivalent to an 8250 -->
 +
| COM1 = Yes
 +
| COM2 = Yes
 +
| COM3 = Yes
 +
| COM4 = Yes
 
  | Parallel ports = 1
 
  | Parallel ports = 1
 +
| Bi-dir =
 +
| ECP =
 +
| EPP =
 +
| LPT1 = Yes
 +
| LPT2 = Yes
 +
| LPT3 = No
 +
| LPT4 = No
 
  | Game ports = 1
 
  | Game ports = 1
| Floppy buses = 0
+
}}
| Secondary floppy = No
+
{{Device Infobox/End
| IDE buses = 0
+
| ST-506 buses = 0
+
| Requires -5VDC =
+
| Requires -12VDC =
+
| Config = [[Config method::Jumpers]]
+
 
  | Driver = N/A
 
  | Driver = N/A
 
}}
 
}}

Latest revision as of 16:38, 13 February 2016

Pine PT-602A
Pine PT-602A.jpg
Bus type ISA
Bus width 8-bit
Bus speed 8 MHz
Manufacturer Unknown
Chipset Unknown
Compatible with RS232, LPT, Gameport, Pine PT-602A
Connectors Gameport, LPT
Requires -5VDC? No
Requires -12VDC? Yes
Config method Jumpers
IO Controller
Serial ports 2
UART 8250
COM1/2/3/4? Yes / Yes / Yes / Yes
Parallel ports 1
Bi-dir?
ECP?
EPP?
LPT1/2/3/4? Yes / Yes / No / No
Game ports 1
Driver N/A

This is a generic I/O card with a Winbond chipset.

Additional photos

Clones

This card has clones:

Related links