Template:Device Infobox/ST-506 Controller

From Vogons Wiki
Revision as of 23:13, 25 March 2016 by Malvineous (Talk | contribs) (Fix capitalisation of device type)

Jump to: navigation, search
Device Infobox/ST-506 Controller
There is no image of this device — upload one!
Bus type Unknown
Bus width Unknown
Bus speed Unknown
8-bit ISA compatible? Unknown
PCI 5V tolerant? Unknown
PCI 3.3V tolerant?
Manufacturer Unknown
Chipset Unknown
Connectors Unknown
Requires -5VDC? Unknown
Requires -12VDC? Unknown
Config method Unknown
ST-506 controller
ST-506 buses Unknown
ROM type
Driver Missing download URL

This template is used to populate the Device Infobox with information about an ST-506 RLL/MFM controller card. See DTC 7287 for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.

Valid parameters and examples specific to this infobox are:

Parameter Meaning
ST-506 buses = Value Number of ST-506 (RLL/MFM) buses that are available on the device. Each bus typically supports the connection of up to two drives.
  • 0 if none
  • 1 if only one bus (up to two drives)
  • 2 for a card with a primary and secondary bus (up to four drives), etc.
ROM type = Value Text value for the type of ROM/EEPROM/Flash chip. One of:
  • None - no ROM chip is present
  • 28-pin JEDEC - standard byte-wide 28-pin ROM/PROM
  • 32-pin JEDEC - standard 32-pin EEPROM/flash chip
  • PLCC32 - 32-pin PLCC flash chip
  • TSOP40 - 40-pin TSOP package, usually flash memory

Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead.

Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").