Template:Device Infobox/Audio

From Vogons Wiki
Jump to: navigation, search
Device Infobox/Audio
There is no image of this device — upload one!
Bus type Unknown
Bus width Unknown
Bus speed Unknown
8-bit ISA compatible? Unknown
PCI 5V tolerant? Unknown
PCI 3.3V tolerant?
Manufacturer Unknown
Chipset Unknown
Connectors Unknown
Requires -5VDC? Unknown
Requires -12VDC? Unknown
Config method Unknown
Audio
Model Unknown
Full duplex Unknown
Max sample rate Unknown
Channels Unknown
FM synth Unknown
Internal
connectors
CD Audio in:None
PC Speaker in:None
Aux in:None
Phone (TAD) in/out:None
Line out:None
SPDIF out:None
MB_PRO:No
SB Link:No
Factory memory Unknown
CD interface Unknown
Driver Missing download URL

This template is used to populate the Device Infobox with information about an audio card. See Creative Sound Blaster Pro 2 for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.

Valid parameters and examples specific to this infobox are:

Parameter Meaning
Model = Value Text value of the device model number, such as CT1350B.
Full duplex = Value Boolean value indicating whether the card can record and play audio at the same time. Yes if it can, No if it can't record while playing audio, or Unknown.
Max sample rate = Value Maximum sampling rate of audio playback. Specify a value with a unit, such as 44.1 kHz
Channels = Value Number of audio channels available. One of the following values:
  • 1 - mono
  • 2 - stereo
  • 4 - front/rear stereo
  • 6 - 5.1
FM synth = Value This is a page field containing one of the following values:
  • OPL2 - Yamaha YM3812
  • Dual OPL2
  • OPL3 - Yamaha YMF262
  • CQM - Creative's own OPL clone
  • ESFM - Esoniq's OPL clone
  • Wavetable - only use for wavetable emulation of FM, this is different to wavetable MIDI
Input/CD = Value

Type of internal (PCB) connector (if any) used to receive CD audio. Allowed values:

See CD audio connectors for a more detailed description of each type.

  • [[Has CD audio input connector::None]] - This connector is unavailable on this device
  • [[Has CD audio input connector::Dupont-2]] - 2-pin 2.54mm/Dupont, looks like a normal 2-pin jumper
  • [[Has CD audio input connector::Dupont-4]] - 4-pin 2.54mm/Dupont without latch housing, LGGR pinout
  • [[Has CD audio input connector::MPC]] - 4-pin 2.54mm/Dupont with latched housing, LGGR pinout
  • [[Has CD audio input connector::SBCD]] - SoundBlaster CD audio connector, small white 4-pin, OLGR pinout
  • [[Has CD audio input connector::SBCD/LOGR]] - same SoundBlaster CD audio connector, but pinout changed to be LOGR (seems a mistake introduced on the AWE64 series)
  • [[Has CD audio input connector::Hitachi CD audio]]
  • [[Has CD audio input connector::Mitsumi CD audio]]
  • [[Has CD audio input connector::NEC CD audio]] - 3-pin, R-G-L, different connector to wake-on-LAN
  • [[Has CD audio input connector::Sony CD audio]] - looks a bit like a floppy power connector, but with different key positions
  • [[Has CD audio input connector::Texel CD audio]]
  • [[Has CD audio input connector::Toshiba CD audio]] - same connector as wake-on-LAN

More connector types can be added to the template page as needed.

Input/PC = Value

Type of internal (PCB) connector (if any) used to receive audio from the PC speaker. Allowed values:

See CD audio connectors for a more detailed description of each type.

  • [[Has PC speaker input connector::None]] - This connector is unavailable on this device
  • [[Has PC speaker input connector::Dupont-2]] - 2-pin 2.54mm/Dupont, looks like a normal 2-pin jumper
  • [[Has PC speaker input connector::Dupont-4]] - 4-pin 2.54mm/Dupont without latch housing, LGGR pinout
  • [[Has PC speaker input connector::MPC]] - 4-pin 2.54mm/Dupont with latched housing, LGGR pinout
  • [[Has PC speaker input connector::SBCD]] - SoundBlaster CD audio connector, small white 4-pin, OLGR pinout
  • [[Has PC speaker input connector::SBCD/LOGR]] - same SoundBlaster CD audio connector, but pinout changed to be LOGR (seems a mistake introduced on the AWE64 series)
  • [[Has PC speaker input connector::Hitachi CD audio]]
  • [[Has PC speaker input connector::Mitsumi CD audio]]
  • [[Has PC speaker input connector::NEC CD audio]] - 3-pin, R-G-L, different connector to wake-on-LAN
  • [[Has PC speaker input connector::Sony CD audio]] - looks a bit like a floppy power connector, but with different key positions
  • [[Has PC speaker input connector::Texel CD audio]]
  • [[Has PC speaker input connector::Toshiba CD audio]] - same connector as wake-on-LAN

More connector types can be added to the template page as needed.

Input/Aux = Value

Type of internal (PCB) connector (if any) used to receive audio from an auxiliary device, such as an MPEG decoder card. Allowed values:

See CD audio connectors for a more detailed description of each type.

  • [[Has aux audio input connector::None]] - This connector is unavailable on this device
  • [[Has aux audio input connector::Dupont-2]] - 2-pin 2.54mm/Dupont, looks like a normal 2-pin jumper
  • [[Has aux audio input connector::Dupont-4]] - 4-pin 2.54mm/Dupont without latch housing, LGGR pinout
  • [[Has aux audio input connector::MPC]] - 4-pin 2.54mm/Dupont with latched housing, LGGR pinout
  • [[Has aux audio input connector::SBCD]] - SoundBlaster CD audio connector, small white 4-pin, OLGR pinout
  • [[Has aux audio input connector::SBCD/LOGR]] - same SoundBlaster CD audio connector, but pinout changed to be LOGR (seems a mistake introduced on the AWE64 series)
  • [[Has aux audio input connector::Hitachi CD audio]]
  • [[Has aux audio input connector::Mitsumi CD audio]]
  • [[Has aux audio input connector::NEC CD audio]] - 3-pin, R-G-L, different connector to wake-on-LAN
  • [[Has aux audio input connector::Sony CD audio]] - looks a bit like a floppy power connector, but with different key positions
  • [[Has aux audio input connector::Texel CD audio]]
  • [[Has aux audio input connector::Toshiba CD audio]] - same connector as wake-on-LAN

More connector types can be added to the template page as needed.

Input/TAD = Value

Type of internal (PCB) connector (if any) used to receive audio from a modem, and to send microphone input to the modem. Allowed values:

See CD audio connectors for a more detailed description of each type.

  • [[Has TAD connector::None]] - This connector is unavailable on this device
  • [[Has TAD connector::Dupont-2]] - 2-pin 2.54mm/Dupont, looks like a normal 2-pin jumper
  • [[Has TAD connector::Dupont-4]] - 4-pin 2.54mm/Dupont without latch housing, LGGR pinout
  • [[Has TAD connector::MPC]] - 4-pin 2.54mm/Dupont with latched housing, LGGR pinout
  • [[Has TAD connector::SBCD]] - SoundBlaster CD audio connector, small white 4-pin, OLGR pinout
  • [[Has TAD connector::SBCD/LOGR]] - same SoundBlaster CD audio connector, but pinout changed to be LOGR (seems a mistake introduced on the AWE64 series)
  • [[Has TAD connector::Hitachi CD audio]]
  • [[Has TAD connector::Mitsumi CD audio]]
  • [[Has TAD connector::NEC CD audio]] - 3-pin, R-G-L, different connector to wake-on-LAN
  • [[Has TAD connector::Sony CD audio]] - looks a bit like a floppy power connector, but with different key positions
  • [[Has TAD connector::Texel CD audio]]
  • [[Has TAD connector::Toshiba CD audio]] - same connector as wake-on-LAN

More connector types can be added to the template page as needed.

Output/Line = Value

Type of internal (PCB) connector (if any) used to output analogue audio. This is different to the 3.5mm headphone connector which is an external connector. Allowed values:

See CD audio connectors for a more detailed description of each type.

  • [[Has line output connector::None]] - This connector is unavailable on this device
  • [[Has line output connector::Dupont-2]] - 2-pin 2.54mm/Dupont, looks like a normal 2-pin jumper
  • [[Has line output connector::Dupont-4]] - 4-pin 2.54mm/Dupont without latch housing, LGGR pinout
  • [[Has line output connector::MPC]] - 4-pin 2.54mm/Dupont with latched housing, LGGR pinout
  • [[Has line output connector::SBCD]] - SoundBlaster CD audio connector, small white 4-pin, OLGR pinout
  • [[Has line output connector::SBCD/LOGR]] - same SoundBlaster CD audio connector, but pinout changed to be LOGR (seems a mistake introduced on the AWE64 series)
  • [[Has line output connector::Hitachi CD audio]]
  • [[Has line output connector::Mitsumi CD audio]]
  • [[Has line output connector::NEC CD audio]] - 3-pin, R-G-L, different connector to wake-on-LAN
  • [[Has line output connector::Sony CD audio]] - looks a bit like a floppy power connector, but with different key positions
  • [[Has line output connector::Texel CD audio]]
  • [[Has line output connector::Toshiba CD audio]] - same connector as wake-on-LAN

More connector types can be added to the template page as needed.

Output/SPDIF = Value

Type of internal (PCB) connector (if any) used to output digital audio. This is different from an externally accessible RCA/coax or optical output. Allowed values:

See CD audio connectors for a more detailed description of each type.

  • [[Has SPDIF output connector::None]] - This connector is unavailable on this device
  • [[Has SPDIF output connector::Dupont-2]] - 2-pin 2.54mm/Dupont, looks like a normal 2-pin jumper
  • [[Has SPDIF output connector::Dupont-4]] - 4-pin 2.54mm/Dupont without latch housing, LGGR pinout
  • [[Has SPDIF output connector::MPC]] - 4-pin 2.54mm/Dupont with latched housing, LGGR pinout
  • [[Has SPDIF output connector::SBCD]] - SoundBlaster CD audio connector, small white 4-pin, OLGR pinout
  • [[Has SPDIF output connector::SBCD/LOGR]] - same SoundBlaster CD audio connector, but pinout changed to be LOGR (seems a mistake introduced on the AWE64 series)
  • [[Has SPDIF output connector::Hitachi CD audio]]
  • [[Has SPDIF output connector::Mitsumi CD audio]]
  • [[Has SPDIF output connector::NEC CD audio]] - 3-pin, R-G-L, different connector to wake-on-LAN
  • [[Has SPDIF output connector::Sony CD audio]] - looks a bit like a floppy power connector, but with different key positions
  • [[Has SPDIF output connector::Texel CD audio]]
  • [[Has SPDIF output connector::Toshiba CD audio]] - same connector as wake-on-LAN

More connector types can be added to the template page as needed.

Has MB_PRO = Yes Optional. Boolean value indicating whether the device has an MB_PRO connector.
Has SB Link = Yes Optional. Boolean value indicating whether the device has an SB Link connector.
Factory memory = Value Optional. Amount of memory typically shipped with the card, e.g. soldered on when other sockets are empty. Provide a value with a suffix, such as 512 B (bytes), 256 kB, 2 MB, etc.
Max memory = Value Optional. Maximum RAM capacity of the device when all slots are fully populated with the largest capacity chips supported. Provide a value with a suffix, such as 512 B (bytes), 256 kB, 2 MB, etc.
CD interface = Value Page field listing one or more interfaces to CD drives in a comma-separated list:
  • [[Has CD interface::None]] (no CD interface)
  • [[Has CD interface::IDE]] (standard IDE controller, remember to include Template:Device Infobox/IDE Controller)
  • [[Has CD interface::SCSI]]
  • [[Has CD interface::Matsushita MKE]] (aka Panasonic)
  • [[Has CD interface::Sony]]
  • [[Has CD interface::LMSI]]
  • [[Has CD interface::Mitsumi]]

Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").