Search results

Create the page "Has clock speed" on this wiki! See also the search results found.

Page title matches

• Property:Has clock speed
  Nominal processor speed. Provide a value with a suffix, such as '''100 MHz''', '''2.4 GHz''', etc.
  192 bytes (26 words) - 19:34, 23 April 2016

Page text matches

• 3dfx
  ...y activating VSync in the drivers or in the games, a solution which itself has the problem of causing mouse lag in many cases. ...ered to perform virtually identically with contemporary games, but testing has shown that later games can largely profit from higher bus bandwidth.[http:/
  32 KB (5,353 words) - 22:25, 15 June 2022
• NVIDIA
  ...d VBE3. RIVA 128 has all the hardware features required for Direct3D 5 and has also good OpenGL compatibility. It renders at only 16-bit color depth. The ...if they are only point-sampled. Overall RIVA 128 is an interesting mix of speed and compromise.
  19 KB (3,051 words) - 08:13, 13 January 2019
• Intel CPUs
  ...zed. The 2.5X mode was originally meant to be used in a 486DX3-63,83 (2.5X clock) but these were deemed to be unmarketable. ...the limited variety of CPU's manufactured for this socket and the limited speed options these motherboards provided, Socket 4 is a far less flexible platfo
  14 KB (2,343 words) - 00:11, 19 October 2020
• Socket 5 / 7 / Super-7 Motherboards
  ...a die shrink revision of the Pentium and operated at 75-120MHz with a bus speed of 50MHz, 60MHz or 66MHz. ...ve CPUs that were produced to match Socket 5 options to later Socket 7 CPU clock speeds.
  8 KB (1,304 words) - 15:49, 29 March 2022
• Socket 8 / Slot 1 / Socket 370 Motherboards
  ...ing 8/16-bit code, the PPro can be slower than a Pentium at the same clock speed. In the best case with 32-bit code or heavy FPU operation, it far outperfor ...Tualatin-core Celeron which will be underclocked also, but will provide a speed up to around 1000MHz. Some of the 440LX motherboards had issues with poweri
  22 KB (3,456 words) - 10:00, 17 December 2020
• Athlon Motherboards
  ...onsume considerably more power than Pentium II and III. Make sure your PSU has at least 20A on 5v for Slot A and early Socket A boards. Uses either 686A or B southbridge. 686B soutbridge has PCI errata that can be triggered by some PCI cards such as sound cards. It
  8 KB (1,239 words) - 12:18, 21 February 2013
• Matrox
  ...rt, it's safe to say the videocard has no known flaws. The image is crisp, has fine colors. But the 3D part lacked a lot of functions, which were removed This was primarily a budget VGA/GUI "productivity" accelerator card. It has somewhat improved 3D hardware compared to the Mystique and Millennium II, w
  7 KB (1,087 words) - 07:25, 5 April 2018
• Rendition
  ...ating asynchronously, by default usually clocked twice as high as the chip clock. V2x00 is AGP capable but operates as a 66 MHz PCI device, without AGP's sp
  5 KB (747 words) - 19:56, 28 April 2013
• S3
  ...o the integration of 3 components into one ASIC: RAMDAC, graphics core and clock generator. Higher integration reduces overall product cost. ...riants are popular for DOS gaming due to their high compatibility and good speed.
  9 KB (1,363 words) - 16:38, 6 December 2016
• AMD CPUs
  ...k basis, but suffered from excessive heat production, especially the 80MHz clock doubled parts. This was later rectified in the 3.3V versions. Although the ...life into an aging 486 computer. Despite sharing the same name, the am5x86 has nothing in common with the Cyrix 5x86 chip which uses a true 5th generation
  13 KB (2,290 words) - 18:04, 22 October 2015
• Socket 7 Builds
  Pentium MMX are known to work fine over clock. For that purpose 233MHz version should be used, as most 166 and 200MHz ver ...voltage of 3.52 V. As the K5s architecture did not scale well with higher clock rates the fastest K5 officially released was the K5 PR166 running at 66x 1.
  12 KB (2,001 words) - 04:26, 5 April 2013
• VIA CPUs
  ...competitive with Intel Celeron unless run at a much higher relative clock speed. The Cyrix IIIs and C3s did however consume very little power compared to o ...the only variant which had it's FPU run at full speed instead of the half speed all the previous C3s had their FPU run at.
  2 KB (323 words) - 21:51, 24 December 2015
• Single Board Computers
  '''Disclaimer-type thing''': Information on this page has been derived from manuals and photographs, and there is the possibility of ...e is also the Pentium 4 clock modulation feature that can reduce the clock speed to 12.5% of normal, HOWEVER, this apparently cripples FSB(and PCI) performa
  24 KB (3,219 words) - 15:50, 30 May 2018
• ATI
  |Sold as "VGA Edge-8" when board has VGA port * Speed enhancements due to a wider bus
  46 KB (7,128 words) - 22:56, 20 May 2021
• CPU
  | ?Has CPU socket = Socket | ?Has clock speed = Clock speed
  434 bytes (60 words) - 19:58, 23 April 2016
• Texas Micro N286
  | Bus speed = 10 MHz | Connectors = [[Has connector::RS232]]
  3 KB (485 words) - 23:31, 26 November 2016
• Intel Pentium III 733
  | Bus speed = 133 MHz | Clock speed = 733 MHz
  1 KB (147 words) - 22:46, 2 May 2020
• AMD Athlon XP 2600+
  | Bus speed = 333 MHz | Clock speed = 1917 MHz
  2 KB (238 words) - 22:48, 2 May 2020
• AMD Athlon XP 1700+
  | Bus speed = 266 MHz | Clock speed = 1467 MHz
  953 bytes (130 words) - 22:47, 2 May 2020
• AMD Athlon XP 2000+
  | Bus speed = 266 MHz | Clock speed = 1667 MHz
  955 bytes (131 words) - 22:47, 2 May 2020

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)