This template is used to populate the Device Infobox with information about a floppy drive. See Accton EN1640 for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.
Valid parameters and examples specific to this infobox are:
|Is ROM socketed = Value||Boolean value indicating whether there is a ROM socket or not. Yes if there is a socket for a boot ROM, or No if there is no boot ROM socket, or the boot ROM chip is soldered onto the PCB (typical for flash ROM chips).|
|ROM type = Value|| Text value for the type of ROM/EEPROM/Flash chip. One of:
Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead.
|Is ROM writable = Value||Boolean value indicating whether the ROM can be reflashed by the target system. Yes if the card can program the ROM itself, or No if the card has no ROM programming capability.|
Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").