Difference between revisions of "Teac FD-55GFR"

From Vogons Wiki
Jump to: navigation, search
(Add Tracks value)
m (Disk size -> Media type)
 
Line 12: Line 12:
 
}}
 
}}
 
{{Device Infobox/Floppy Drive
 
{{Device Infobox/Floppy Drive
  | Disk size = 5.25 inch
+
  | Media type = 5.25 inch floppy disk
 
  | Sides = 2
 
  | Sides = 2
 
  | Tracks = 80 <!-- Nominal; actual max track unknown -->
 
  | Tracks = 80 <!-- Nominal; actual max track unknown -->

Latest revision as of 22:32, 25 March 2016

Teac FD-55GFR
Teac FD-55GFR.jpg
Bus type PC Floppy
Bus width 1-bit
Bus speed 500 kHz
0.5 MHz
Manufacturer Teac
Chipset IR4N171
Compatible with DOS 1.2MB, DOS 360kB, DOS 180kB
Connectors None
Requires -5VDC? No
Requires -12VDC? No
Floppy Drive
Media type 5.25 inch floppy disk
Property "Has media type" has been marked for restricted use.
Sides 2
Tracks 80
Density High
Driver N/A

The Teac FD-55GFR is the most capable drive in the Teac FD-55 series, able to read disks written by all other models in the series, and write to many of them as well. It can read and write double-sided high-density 80-track (1.2MB) disks, as well as reading double-sided double-density 40-track (360kB) disks. It is also capable of reading the older single-sided double-density 40-track (160/180kB) format as well, used by the earliest versions of DOS.

Being an 80-track drive however, it still suffers from the same problems as any other when writing to 40-track (double-density) disks.

The GFR suffix indicates the drive combines functionality of the G (high-density) and F (double-density) models, with R referring to a refresh, where the design was refined to reduce manufacturing cost and power consumption.

Additional photos