Difference between revisions of "NuXT"

From Vogons Wiki
Jump to: navigation, search
(Version 1.1)
Line 1: Line 1:
 
[[File:NuXT_Back.jpg|200px|thumb|NuXT Motherboard (v1.0)]]
 
[[File:NuXT_Back.jpg|200px|thumb|NuXT Motherboard (v1.0)]]
 +
 +
The NuXT is an 8088 class motherboard built using a mixture of new and original components.
 +
 +
It is based on schematics by Sergey Kiselev and manufactured by Monotech PCs.
 +
 +
It allows native 8088 operation while supporting newer interfaces such as ATX, VGA & CF Card
  
 
==Features==
 
==Features==
Line 37: Line 43:
 
* Changed to 4-layer PCB to make routing easier.
 
* Changed to 4-layer PCB to make routing easier.
 
* moved RS222 transceiver next to the UART, and routed to the serial port all 9 wires including GND, alone as if it was a serial cable.
 
* moved RS222 transceiver next to the UART, and routed to the serial port all 9 wires including GND, alone as if it was a serial cable.
 +
 +
== External Links ==
 +
 +
[https://monotech.fwscart.com/ Monotech PCs]

Revision as of 16:57, 3 June 2019

NuXT Motherboard (v1.0)

The NuXT is an 8088 class motherboard built using a mixture of new and original components.

It is based on schematics by Sergey Kiselev and manufactured by Monotech PCs.

It allows native 8088 operation while supporting newer interfaces such as ATX, VGA & CF Card

Features

  • 8088 and NEC V20 support
  • 8087 co-processor support
  • 4.77MHz, switchable to 9.55MHz with Ctrl-Alt-+
  • 2x64K ROM, switchable with DIP switch, writable
  • 800K SRAM
    • 640K conventional
    • up to 160K UMBs (128K max when using VGA)
    • Configured DOS 6.22 uses only 10K conventional!
  • Highly-compatible TVGA9000i SVGA
  • HD Floppy controller, with FM support
  • Bootable CF Card Interface - 64MB CF Card Included! Loaded with DOS and ready to go.
  • ROM Socket, supporting 8K and 32K ROMs, writable
  • 16C550 Serial Port
  • PS/2 Keyboard Port
  • ATX Power Input. Generates own -5V
  • 4 x 8-bit ISA Slots
  • Front-panel connector for modern cases
  • Highly configurable via DIP switches. All onboard peripherals can be disabled

Version 1.1

  • VGA disable fixed
  • Floppy disable fixed
  • Serial circuitry moved to improve reliability
  • Re-arranged board to allow 16-bit cards in 3 of the 4 slots instead of 1 of the 4

Version 1.2

Changes from Version 1.1 include:

  • Black PCB
  • Memory address decoder SPLD replaced with discrete logic.
  • More documentation text on the back
  • Changed to 4-layer PCB to make routing easier.
  • moved RS222 transceiver next to the UART, and routed to the serial port all 9 wires including GND, alone as if it was a serial cable.

External Links

Monotech PCs