Difference between revisions of "Intel 8∕16 LAN Adapter"

From Vogons Wiki
Jump to: navigation, search
(Update infobox)
(Update infobox)
Line 1: Line 1:
{{Ethernet Infobox
+
{{Device Infobox/Begin
 
  | Bus type = ISA
 
  | Bus type = ISA
 
  | Bus width = 16-bit
 
  | Bus width = 16-bit
Line 8: Line 8:
 
  | Compatible with = <!-- Not sure? [[Has compatibility::NE1000]], [[Has compatibility::NE2000]] -->
 
  | Compatible with = <!-- Not sure? [[Has compatibility::NE1000]], [[Has compatibility::NE2000]] -->
 
  | Connectors = [[Has connector::AUI]], [[Has connector::BNC]]
 
  | Connectors = [[Has connector::AUI]], [[Has connector::BNC]]
 +
| Requires -5VDC = No
 +
| Requires -12VDC = No
 +
| Config = [[Config method::Software]]
 +
}}
 +
{{Device Infobox/Ethernet
 
  | Is ROM socketed = Yes
 
  | Is ROM socketed = Yes
 
  | ROM type = 32-pin JEDEC
 
  | ROM type = 32-pin JEDEC
 
  | Is ROM writable = Yes
 
  | Is ROM writable = Yes
| Requires -5VDC = Unknown
+
}}
| Requires -12VDC = Unknown
+
{{Device Infobox/End
| Config = [[Config method::Software]]
+
 
  | Driver<!-- TODO -->
 
  | Driver<!-- TODO -->
 
}}
 
}}

Revision as of 17:12, 13 February 2016

Intel 8∕16 LAN Adapter
Intel 8∕16 LAN Adapter.jpg
Bus type ISA
Bus width 16-bit
Bus speed 8 MHz
8-bit ISA compatible? Yes
Manufacturer Intel
Chipset i82586
Connectors AUI, BNC
Requires -5VDC? No
Requires -12VDC? No
Config method Software
Ethernet
Boot ROM Socket, 32-pin JEDEC, read-write
Driver Missing download URL

The Intel 8∕16 LAN Adapter is a 10Mbps network card.

Additional photos

Boot ROM

This card's boot ROM socket appears to take a standard 32-pin flash chip, however at the time of writing this has not been tested.

The card's DOS drivers come with a configuration program (SOFTSET.EXE) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like the I/O address and IRQ.