How to make a Voodoo 2 SLI cable

From Vogons Wiki
Revision as of 03:34, 3 April 2013 by D1stortion (Talk | contribs) (Created page with "SLI cable pinout Two Voodoo 2 cards can succesfully run in SLI mode. During SLI mode, one card renders every even line of the screen...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
SLI cable pinout

Two Voodoo 2 cards can succesfully run in SLI mode. During SLI mode, one card renders every even line of the screen, while the other card renders every odd line of the screen. This results in higher resolutions (up to 1024x768) with higher performance. To arrange an SLI setup you need two Voodoo 2 cards, 1 passthrough cable and 1 SLI cable. SLI cables are not common and are quite hard to find. It's easier to make one from FDD cable according to the pinout on the right.

Note that in early driver versions it was not possible to combine two cards of different manufacturer or revision. If your setup does not detect SLI, first of all try using the newest drivers.