Difference between revisions of "How to make a Voodoo 2 SLI cable"

From Vogons Wiki
Jump to: navigation, search
Line 1: Line 1:
 
[[File:SLI_cable_pinout.jpg|200px|thumb|SLI cable pinout]]
 
[[File:SLI_cable_pinout.jpg|200px|thumb|SLI cable pinout]]
  
Two Voodoo 2 cards can succesfully run in SLI mode. During SLI mode, one card renders every even line of the screen, while the other card renders every odd line of the screen. This results in higher resolutions (up to 1024x768) with higher performance. To arrange an SLI setup you need two Voodoo 2 cards, 1 passthrough cable and 1 SLI cable. SLI cables are not common and are quite hard to find. It's easier to make one from FDD cable according to the pinout on the right. See [http://www.vogonswiki.com/index.php/File:SLI_cable_blueprint.gif blueprint], if you have trouble locating pins.
+
Two Voodoo 2 cards can succesfully run in SLI mode. During SLI mode, one card renders every even line of the screen, while the other card renders every odd line of the screen. This results in higher resolutions (up to 1024x768) with higher performance. To arrange an SLI setup you need two Voodoo 2 cards, 1 [[VGA passthrough cablesthrough cable]] and 1 SLI cable. SLI cables are not common and are quite hard to find. It's easier to make one from FDD cable according to the pinout on the right. See [http://www.vogonswiki.com/index.php/File:SLI_cable_blueprint.gif blueprint], if you have trouble locating pins.
  
 
''Note that in early driver versions it was not possible to combine two cards of different manufacturer or revision. If your setup does not detect SLI, first of all try using the newest drivers.''
 
''Note that in early driver versions it was not possible to combine two cards of different manufacturer or revision. If your setup does not detect SLI, first of all try using the newest drivers.''

Revision as of 03:52, 3 April 2013

SLI cable pinout

Two Voodoo 2 cards can succesfully run in SLI mode. During SLI mode, one card renders every even line of the screen, while the other card renders every odd line of the screen. This results in higher resolutions (up to 1024x768) with higher performance. To arrange an SLI setup you need two Voodoo 2 cards, 1 VGA passthrough cablesthrough cable and 1 SLI cable. SLI cables are not common and are quite hard to find. It's easier to make one from FDD cable according to the pinout on the right. See blueprint, if you have trouble locating pins.

Note that in early driver versions it was not possible to combine two cards of different manufacturer or revision. If your setup does not detect SLI, first of all try using the newest drivers.