Difference between revisions of "Creative Sound Blaster Pro 2"

From Vogons Wiki
Jump to: navigation, search
m (-5V no, -12V yes)
(Update infobox)
Line 1: Line 1:
{{Sound Infobox
+
{{Device Infobox/Begin
 
  | Bus type = ISA
 
  | Bus type = ISA
 
  | Bus width = 16-bit
 
  | Bus width = 16-bit
Line 5: Line 5:
 
  | 8-bit ISA compatible = Yes
 
  | 8-bit ISA compatible = Yes
 
  | Manufacturer = Creative Labs
 
  | Manufacturer = Creative Labs
| Model = CT1600
 
 
  | Chipset = CT1336A
 
  | Chipset = CT1336A
 
  | Compatible with = [[Has compatibility::Sound Blaster]]
 
  | Compatible with = [[Has compatibility::Sound Blaster]]
 
  | Connectors = [[Has connector::Mic]], [[Has connector::Line out]], [[Has connector::Speaker out]], [[Has connector::Gameport]]
 
  | Connectors = [[Has connector::Mic]], [[Has connector::Line out]], [[Has connector::Speaker out]], [[Has connector::Gameport]]
 +
| Requires -5VDC = No
 +
| Requires -12VDC = Yes
 +
| Config = [[Config method::Jumpers]]
 +
}}
 +
{{Device Infobox/Audio
 +
| Model = CT1600
 
  | Full duplex =
 
  | Full duplex =
 
  | Max sample rate =
 
  | Max sample rate =
 
  | Channels = 2
 
  | Channels = 2
 
  | FM synth = OPL3
 
  | FM synth = OPL3
 +
| Factory memory = 0
 
  | Max memory = 0
 
  | Max memory = 0
 
  | CD interface = [[CD interface::Matsushita MKE]]
 
  | CD interface = [[CD interface::Matsushita MKE]]
| Config = [[Config method::Jumpers]]
+
}}
| Requires -5VDC = No
+
{{Device Infobox/End
| Requires -12VDC = Yes
+
 
  | Driver<!-- TODO -->
 
  | Driver<!-- TODO -->
 
}}
 
}}

Revision as of 19:41, 13 February 2016

Creative Sound Blaster Pro 2
Creative Sound Blaster Pro 2.jpg
Bus type ISA
Bus width 16-bit
Bus speed 8 MHz
8-bit ISA compatible? Yes
Manufacturer Creative Labs
Chipset CT1336A
Compatible with Sound Blaster
Connectors Mic, Line out, Speaker out, Gameport
Requires -5VDC? No
Requires -12VDC? Yes
Config method Jumpers
Audio
Model CT1600
Full duplex Unknown
Max sample rate Unknown
Channels 2
FM synth OPL3
Internal
connectors
CD Audio in:None
PC Speaker in:None
Aux in:None
Phone (TAD) in/out:None
Line out:None
SPDIF out:None
MB_PRO:No
SB Link:No
Factory memory 0
0 B
Max memory 0
0 B
CD interface Matsushita MKE
Driver Missing download URL

The Sound Blaster Pro 2 was a revision to the original SB Pro, replacing the dual OPL2 chips with a single OPL3. The card is technically only an 8-bit one - the extra connectors that fit into the 16-bit slot are only used for selecting IRQ 10 and/or DMA 0.

Additional photos