Difference between revisions of "CD audio connectors"

From Vogons Wiki
Jump to: navigation, search
(Document some different cable types)
 
(Add more connector types)
Line 1: Line 1:
 +
== MPC-2 ==
 +
 +
The '''MPC-2''' connector is the most recent standard, used by most drives since the late 1990s.  It uses a [http://www.molex.com/molex/products/datasheet.jsp?part=active/0701070002_CRIMP_HOUSINGS.xml Molex 70107] connector, which has standard 2.54mm spacing so it can mate with the older 4-pin Dupont connectors.  In addition it has a locking clip to prevent the connector from working its way loose.
 +
 +
The pinout is R-G-G-L, with R being pin 1.
 +
 +
== 4-pin Dupont ==
 +
 +
This is a standard type of PCB connector, having been used to connect the PC speaker since the very first PCs.  It is physically compatible with the later '''MPC''' standard, however the signal lines are not standardised.  Many were R-G-G-L so are compatible with MPC, but there are likely to be other versions that use R-G-L-G which was another common layout.
 +
 +
For this reason when specifying a 4-pin Dupont connector, it should be listed as '''4-pin Dupont RGGL''' to avoid ambiguity.
 +
 +
== SoundBlaster CD audio ==
 +
 +
This tiny connector looks similar to JST but is slightly smaller and was used on Creative Labs sound cards as the earliest CD audio connector.
 +
 +
The pinout for this connector is O-L-G-R, with R being pin 4. (O is Open, or "not connected".)
 +
 +
Apparently the connector changes on AWE64 cards, and becomes L-O-G-R, as if the MPC pin layout was used by accident.
 +
 
== Sony CD audio ==
 
== Sony CD audio ==
 
[[Image:Sony CD audio cable.gif|right]]
 
[[Image:Sony CD audio cable.gif|right]]
Line 22: Line 42:
 
== Hitachi CD audio ==
 
== Hitachi CD audio ==
 
[[Image:Hitachi CD audio cable.gif|right]]
 
[[Image:Hitachi CD audio cable.gif|right]]
 +
 +
== External links ==
 +
 +
* [http://www.aesystems.com/cdrom_audio_connectors.html AE Systems CD audio cable technote]
  
 
[[Category:CD audio]]
 
[[Category:CD audio]]

Revision as of 14:40, 20 March 2016

MPC-2

The MPC-2 connector is the most recent standard, used by most drives since the late 1990s. It uses a Molex 70107 connector, which has standard 2.54mm spacing so it can mate with the older 4-pin Dupont connectors. In addition it has a locking clip to prevent the connector from working its way loose.

The pinout is R-G-G-L, with R being pin 1.

4-pin Dupont

This is a standard type of PCB connector, having been used to connect the PC speaker since the very first PCs. It is physically compatible with the later MPC standard, however the signal lines are not standardised. Many were R-G-G-L so are compatible with MPC, but there are likely to be other versions that use R-G-L-G which was another common layout.

For this reason when specifying a 4-pin Dupont connector, it should be listed as 4-pin Dupont RGGL to avoid ambiguity.

SoundBlaster CD audio

This tiny connector looks similar to JST but is slightly smaller and was used on Creative Labs sound cards as the earliest CD audio connector.

The pinout for this connector is O-L-G-R, with R being pin 4. (O is Open, or "not connected".)

Apparently the connector changes on AWE64 cards, and becomes L-O-G-R, as if the MPC pin layout was used by accident.

Sony CD audio

Sony CD audio cable.gif

The Sony cable looks very similar to a floppy power (Berg) connector, but it has different keying pins.


Texel CD audio

Texel CD audio cable.gif


Toshiba CD audio

Toshiba CD audio cable.gif


NEC CD audio

NEC CD audio cable.gif


Mitsumi CD audio

Mitsumi CD audio cable.gif


Hitachi CD audio

Hitachi CD audio cable.gif

External links