Difference between revisions of "3Com 3c509"

From Vogons Wiki
Jump to: navigation, search
 
Line 35: Line 35:
  
 
The card's DOS drivers come with a configuration program (<tt>3C50XCFG.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ.
 
The card's DOS drivers come with a configuration program (<tt>3C50XCFG.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ.
If used in an EISA board the card can be set to EISA mode by use oof the utility and later configured by the ECU.
+
If used in an EISA board the card can be set to EISA mode by use of the utility and later configured by the ECU.
 
== Resources ==
 
== Resources ==
  

Latest revision as of 21:51, 15 March 2018

3Com 3c509
3Com 3c509.jpg
Bus type ISA
Bus width 16-bit
Bus speed 8 MHz
8-bit ISA compatible? Yes
Manufacturer 3 Com Corporation
Chipset 3Com 9513S
Compatible with 3C5X9
Connectors AUI, BNC, RJ45
Requires -5VDC? No
Requires -12VDC? No
Config method Software
Ethernet
Boot ROM Socket, 28-pin JEDEC, read-only
Driver Missing download URL

The 3 Com 3C509 is a 10Mbps network card from 3 Coms popular Etherlink III series, it was introduced in 1994. There are versions with different connector types availiable, with the Combo variant shown here being the most versatile.


Additional photos

Boot ROM

This card's boot ROM socket will take a standard 28-pin ROM chip.

The card's DOS drivers come with a configuration program (3C50XCFG.EXE) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ. If used in an EISA board the card can be set to EISA mode by use of the utility and later configured by the ECU.

Resources

  • I/O address: 0x280, 0x300, 0x310, 0x320, 0x330, 0x340, 0x350.
  • IRQ: 5, 7, 9, 10, 11, 12.
  • Boot ROM size: 8 kB, 16kB, 32kB, Disabled.
  • Boot ROM: 0xC0000 - 0xDE000.

References