Template:Device Infobox/Video
Device Infobox/Video
There is no image of this device — upload one!
| Bus type | Unknown |
|---|---|
| Bus width | Unknown |
| Bus speed | Unknown |
| 8-bit ISA compatible? | Unknown |
| PCI 5V tolerant? | Unknown |
| PCI 3.3V tolerant? | |
| Manufacturer | Unknown |
| Chipset | Unknown |
| Connectors | Unknown |
| Requires -5VDC? | Unknown |
| Requires -12VDC? | Unknown |
| Config method | Unknown |
| Video Output | |
| Max memory | Unknown |
| Max resolution | Unknown |
| ROM type | Unknown |
| Driver | Missing download URL |
This template is used to populate the Device Infobox with information about a video card, video capture card, or hardware encoder/decoder device (like an MPEG decoder.). See S3 Trio64V+ for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.
Valid parameters and examples specific to this infobox are:
| Parameter | Meaning |
|---|---|
| Max memory = Value | Maximum RAM capacity of the device when all slots are fully populated with the largest capacity chips supported. Provide a value with a suffix, such as 512 B (bytes), 256 kB, 2 MB, etc. |
| Max res X = Value | Number of pixels in width of the maximum screen resolution, with the most amount of memory, in any available colour depth. |
| Max res Y = Value | Number of pixels in height of the maximum screen resolution, with the most amount of memory, in any available colour depth. |
| ROM type = Value | Text value for the type of ROM/EEPROM/Flash chip. One of:
Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead. |
Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").
