VLB IDE Controllers: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
= Full VL-bus IDE chip list = | = Full VL-bus IDE chip list = | ||
| Line 52: | Line 44: | ||
|- | |- | ||
| Micronics || MIC491 || Mid 93 || 1 || ? || || || † BIOS Setup || || || † IDE Speed: Normal / Medium / Fast (register <code>104h</code> = <code>69h</code> / <code>67h</code> / <code>63h</code>) || † No driver; the system BIOS sets it || † Onboard on the Micronics GJX30G; BIOS says "Gateway 2000 Local Bus BIOS" || † None. The BIOS only checks that no other IDE controller answers at <code>1F0h</code> || † <code>out 9Ch,7Fh</code> opens ports <code>102h</code>–<code>106h</code>; <code>104h</code> = speed, <code>102h</code> bit 0 = IDE on || GJX30G BIOS 09-24-93 | | Micronics || MIC491 || Mid 93 || 1 || ? || || || † BIOS Setup || || || † IDE Speed: Normal / Medium / Fast (register <code>104h</code> = <code>69h</code> / <code>67h</code> / <code>63h</code>) || † No driver; the system BIOS sets it || † Onboard on the Micronics GJX30G; BIOS says "Gateway 2000 Local Bus BIOS" || † None. The BIOS only checks that no other IDE controller answers at <code>1F0h</code> || † <code>out 9Ch,7Fh</code> opens ports <code>102h</code>–<code>106h</code>; <code>104h</code> = speed, <code>102h</code> bit 0 = IDE on || GJX30G BIOS 09-24-93 | ||
|} | |} | ||
Revision as of 19:05, 12 November 2026
Full VL-bus IDE chip list
- † marks a value that was changed or added from the code. Where it replaces a spreadsheet value, the old value is given in brackets.
- – means nothing to record (no driver found, or the driver doesn't do it).
- ? means not known.
- The details behind the last three columns are in CHIP-ID.md (detection) and TIMING.md (timing registers, settings and PIO equivalents).
Software-configured
| Brand | Chip | Date | IDE Ports | Fastest Mode | IO RDY | Internal Strobes | Config Method | MR BIOS Support | XUB Support | Speed Settings | Driver Notes | Other Names / Notes | Detection (VL-bus) | Timing registers | Examined |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ADD2 | DW729 | Late 93 | 2 | PIO-3 | Driver | Setup configures per drive | Driver Options: S/00 R/00 W/00 M/00 P/00. † Driver code is XOR-encrypted | Dataworld DW729 | Bases 100h–1C0h: out base,85h unlock, register 0Ah reads 41h ('A'). Genuine part: register 17h = B5h |
Registers 80h–87h at base+1 after each 85h unlock |
ADD_IDE.SYS 1.03 | ||||
| Appian | ADI/2 | Mid 93 | 1 | PIO-4 | Yes | Yes | Driver | 3.21 | † ctime=, dtime= (also c=, d=, s=, m=) [No flags] |
flexidrv.sys from Adaptec is best | ALi M5213; AIC-25VL0x; CL-PD7220. † FLEXIDRV also drives the AIC-25PC10 (VL-bus or PCI) | Ports 35h/B5h must differ from the PIC masks at 21h/A1h. † Then an ID echo at 0AD4h, 34h or B4h: ID 38h+ = AIC-25PC10 (VL-bus mode), lower = AIC-25VL01. The PCI 25PC10 is Appian 1097:0038 |
† ID at base, index at base+4, data at base+8 (write the ID first). Registers 3/4 (drive 0) and 8/9 (drive 1): active clocks in bits 7–4, recovery clocks in bits 3–0. 7/12: address setup. 1: config; 13: revision | FLEXIDRV.SYS 2.14 | |
| Atronics | IDE-2015PL | Late 94 | 2 | PIO-4 | Driver | /Dx:Px where x= 0-4. † /T:25/33/40/50 picks the bus-clock table |
2015PL.SYS /Dx:P4 | DTC 803 † (sticker on the 2015PL; VL DTC 2278S/D/D Plus/E/B and PCI 2130D) | Index E0h/data E4h, then B0h/B4h; register echo with 3F6h reads between accesses |
One register per drive through the same index/data pair. † 2015PL.SYS: per-clock tables for PIO 0 / 3 / 4 at 25–50 MHz; /T:66 reads past the tables (bug). Linux dtc2278.c writes A0h/C3h for PIO 3+ at B0h/B4h |
2015PL.SYS 3.27, DOSEIDE.SYS 2.1A | ||||
| CMD | PCI0640B | Late 94 | 2 | PIO-4 | Yes | Yes | Driver | 3.21 | /PIOMODE:X where x= 0-4. † CMD640X.VL 2.09 uses /A<MHz>, /O<port><drive><mode>, /H |
Stability issues at fastest speeds. † Hidden switches /CMD, /FOO:BAR |
Index 178h/data 17Ch (else 78h/7Ch): register 50h not 00h/FFh, bit 5 set; register 5Bh echoes BDh |
Registers 51h–58h; per-drive clocks computed from /A<MHz> |
CMD640X.VL 2.09 | ||
| Promise | PDC-20230c | Late 93 | 1 | PIO-3 | Yes | Yes | Driver | 3.21 | Yes | 1(slow), 8 (fast), A (iordy). † The PROMISE.SYS 3.3 README lists levels 0–8. † Config-mode 1F3h speeds 0–7: 630 to 240 ns at 33 MHz; jumpers give 2, 4, 6. † Levels 0–8 confirmed (owner); PROMISE.SYS has 9-entry tables, one per level |
† PROMISE.SYS 3.3 supports the 20230-B, 20230-C and 20630 (owner) | † Code name VG3, TurboChip C (Soucek) | † Config-mode unlock on the IDE ports: in 1F5h, set 1F2h bit 7, in 1F2h, in 3F6h ×2, in 1F2h ×3; bit 7 reads back clear = Promise |
Index 1F8h/data 1F9h: registers 2n/2n+1 get a word from one of four tables chosen by the measured bus speed. Register 7 = transfer status. † No chip ID read; same code for every Promise chip. † Four 9-entry tables (one per measured bus class), shared by all three Promise chips |
PROMISE.SYS 3.3 (PROMISE.SYS 3.3; it doesn't name the chip) |
| Promise | PDC-20630 | Mid 94 | 2 | WDMA2 | Yes | Yes | Driver | 3.21 | Yes | 1(slow), 8 (fast), A (iordy) | Internal PIO Clock. † PROMISE.SYS 3.3 issues READ/WRITE DMA (C8h/CAh) and moves the data to memory by PIO from 1F0h. † PROMISE.SYS 3.3 supports the 20230-B, 20230-C and 20630 (owner) |
WDMA2 is chip-to-pata, no DMA to system RAM. † PROMISE.SYS 3.3 only ever sets the drive to multiword DMA mode 1 (SET FEATURES 21h, DMA levels 7–8); it never sends 22h |
† As PDC-20230c, then 1F4h bit 3 makes 1F8h read back its index (bits 0–2) |
† 1F3h speed as PDC-20230c, plus four timing registers through 1F8h/1F9h (enabled by 1F4h bit 3) |
PROMISE.SYS 3.3 (same code path; no chip check) |
| QDI | Vision 5500 | Early | 1 | PIO-2 | Driver | Setup configures per drive | Not found yet: QDI5500.sys. † The only reference to this chip found so far is in TH99; Linux pata_legacy has no QD5500 support (only QD6500/6580/6580DP) | – | – | – | |||||
| QDI | Vision 6500 | Mid 93 | 1 | PIO-2 | Driver | Yes | Setup configures per drive. † Driver picks a timing class from its drive table | Register 31h (or B1h): upper nibble C0h; bit 3 set = disabled |
One timing byte at 30h/B0h (active bits 0–2, recovery bits 4–7) |
QD6500.SYS 2.4 | |||||
| QDI | Vision 6580 | Late 94 | 2 | PIO-4 | Card | Half | Driver | Yes | Setup configures per drive | PIO timing based on bus clock | Register 31h (or B1h): upper nibble A0h or 50h |
As QD6500, plus secondary-channel timing | qd6580.sys 3.7 | ||
| SIS | 83C601 | Early 95 | 1 | PIO-4? | Yes | Yes | Driver | 3.21 | Waitstate 1 (fast) -7 (slow) | Newer than the 83C611 Tyan Driver is 1995-04. Early 95 is the earliest fab date seen. † SIIG also shipped its own drivers for this chip (owner) | † PCI ID 1039:0601 (SIS611.SYS 08/94 already checks for it) |
in 1F3h; in 1F2h ×4; out 1F2h,F3h; 1F2h reads D3h |
1F2h ← F0h + (wait state − 1) after the same unlock |
S134XM1.SYS 2.0, S134XD1.COM 3.5 (drivers don't name the chip; wait-state range matches) | |
| SIS | 83C611 | Late 93 | 1 | PIO-4? | Yes | Driver | 3.21 | † Wait state 0–7 for each channel | Older than the 83C601 | † Driver banner says "VL/PCI-IDE"; the PCI check is unused | Same 1F2h sequence (0C14h) |
1F2h: F3h, B5h, then computed wait states |
SIS611.SYS 2.11 | ||
| Tans | TS8310 | Mid 94 | 2 | PIO-2? | Driver | Not found yet: ts8310.zip, BIOS was generic. † Three option ROMs from TANS cards checked: TANS "Enhance IDE driver" v2.00 (1997), v2.10 ">8.4GB" (1999), and SIIG v3.10, which is TANS v2.00 with only the name changed (18 bytes differ). All use only the standard IDE ports at 1F0h/170h/1E8h/168h: no chip detection, no timing writes, and 16-bit rep insw/outsw only (no 32-bit I/O) |
– | – | – | ||||||
| Tans | TS8310A | Late 94 | 2 | PIO-2? | Driver | Not found yet: ts8310.zip, BIOS was generic. † Three option ROMs from TANS cards checked: TANS "Enhance IDE driver" v2.00 (1997), v2.10 ">8.4GB" (1999), and SIIG v3.10, which is TANS v2.00 with only the name changed (18 bytes differ). All use only the standard IDE ports at 1F0h/170h/1E8h/168h: no chip detection, no timing writes, and 16-bit rep insw/outsw only (no 32-bit I/O) |
– | – | – | ||||||
| UMC | UM8672F | Late 94 | 1 | PIO-2 | Driver | Speeds 0 (slow) -11 (fast) | PIO-4 with Modded Driver. † Driver calls speed 10 the "proper speed" for Enhanced IDE drives | UM82C872F | None: 108h/109h unlocked with 5Ah, no ID read back |
Registers D0h–DDh through index 108h/data 109h; all set to CBh (slowest) first. † Six 12-entry tables in UM8672.SYS (chip ID A0h/A2h × 3 bus-speed classes). Linux umc8672.c uses the A0h slow-bus values (UMC-supplied). See TIMING.md, "Timing tables in the drivers" |
UM8672.SYS 2.1 | ||||
| VIA | VT83C461 | Mid 94 | 2 | PIO-2 | Yes | Driver | † PIO_TIME=, DMA_TIME=, SET_DMAM= |
Has a BIOS / AV140 / AV150 / AV300 | † Driver also covers the VT82C496G | Index A8h/data A9h: register 00h upper nibble 70h/90h, register 71h bit 0 set |
Registers 71h (IDE enable), 93h (timing/mode) |
VIAIDE.SYS 4.02 | |||
| Winbond | W83759AF | Early 95 | 2 | PIO-4 † (WBIDE.TXT's ns table makes speed 13 = PIO 3 at 33 MHz) | Yes | Yes | Driver | /D0:13 (speeds 0–13) | software speed config and "advanced mode". † Measures the bus clock with the PC timer. † A hacked driver that enables PIO 4 is reported to exist (owner) | † DTC 2278E Rev W. † F = package type; the A suggests a silicon respin (owner) | Bases 4B0h/5B0h… then 430h/530h…: 63h written at base+0 reads back at base+0Ch; register 87h low nibble = revision; register 80h bit 7 set |
Index base+4, data base+8 | WBIDE.EXE, DOSEIDE.SYS 2.1A (at 5B0h only)
| ||
| Micronics | MIC491 | Mid 93 | 1 | ? | † BIOS Setup | † IDE Speed: Normal / Medium / Fast (register 104h = 69h / 67h / 63h) |
† No driver; the system BIOS sets it | † Onboard on the Micronics GJX30G; BIOS says "Gateway 2000 Local Bus BIOS" | † None. The BIOS only checks that no other IDE controller answers at 1F0h |
† out 9Ch,7Fh opens ports 102h–106h; 104h = speed, 102h bit 0 = IDE on |
GJX30G BIOS 09-24-93 |
Jumper-configured
| Brand | Chip | Date | IDE Ports | Fastest Mode | IO RDY | Internal Strobes | Config Method | MR BIOS Support | XUB Support | Speed Settings | Driver Notes | Other Names / Notes | Detection (VL-bus) | Timing registers | Examined |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Chaintech | CT9000 | Late 93 | 1 | PIO-3 | Yes | Jumper | 0-3 | Not found yet: ct9000.zip | – | – | – | ||||
| DTC | DTC 805 | Early 94 | 1 | PIO-2 | Jumper | 3.9MB/s - 7.2MB/s | † DOSEIDE.SYS has no code for it; it only shows the drive's reported rate | † DTC 2278VL, jumpers W1–W5 | – | – | DOSEIDE.SYS 2.1A | ||||
| GoldStar | GM82C711 | Early 93 | 1 | PIO-3 | Jumper | 0-7 | † GS_DOS.SYS never writes a timing register. † The same GS_DOS.SYS works on the GM82C712 (owner) | Not a PC Chips 82C711 | ? | – | GS_DOS.SYS 1.21 (driver doesn't name the chip) | ||||
| GoldStar | GM82C712 | Mid 95 | 1 | PIO-4 | Yes | Jumper | 0-7 | † GS_DOS.SYS works on it too (owner) | CompassLab CL3202. Not a PC Chips 82C712 | ? | – | GS_DOS.SYS 1.21 (owner: same driver as GM82C711) | |||
| Holtek | HT6560A | Late 94 | 2 | PIO-2 | Jumper | 0 (slow), 3 (fast) | Driver Not found yet | – | – | – | |||||
| Holtek | HT6560B | Early 95 | 2 | PIO-3 | Yes | † Jumper + Driver [Jumper] | 0 (slow), 3 (fast). † Driver /Dn=rt,at: recovery 2–16, active 2–15 bus clocks |
Driver allows AT:2 RT:2 | 3E6h handshake: after three out 3E6h,0 / in 3E6h rounds some of bits 0–5 read back clear; on the fourth all six are set |
† Four reads of 3E6h, then config byte to 3E6h and timing byte (recovery << 4 OR active) to 1F6h [Timing bytes to 3E6h]. Linux pata_legacy 5.15 agrees |
HTIDE.SYS 2.41 | ||||
| Lion | Lion 3+ | Mid 95 | 2 | PIO-3 | † Jumper + Driver [Jumper] | 0 (slow), 2(fast). † Driver sets a mode per drive | Doesn't support ECHS or LBA | Config window on 1F0h/1F1h (opened by reads of 1F3h, 1F2h, 3F6h); register 5 & E0h = 60h |
Per-drive registers through the 1F0h/1F1h window |
LION3.SYS | |||||
| Mach Speed | GTK6189 | Early 94 | 1 | † No driver found | VLB card with a Cirrus CL-GD5428 VGA; the 40-pin IDE header has never been seen fitted, and some traces run to the VGA chip. The card ROM is a standard Cirrus VGA BIOS with nothing about IDE. Jumper positions are unpopulated except one that is hard-shorted, probably to disable the IDE function. Possibly IDE was dropped late in the design (owner's observation) | – | – | – | |||||||
| Opus | Op VIC1 | Late 93 | 1 | † No driver found | Op VIC (VIC = Vesa Ide Controller) | – | – | – | |||||||
| Opus | Op VIC3 | Early 94 | 2 | Driver | Op VIC (VIC = Vesa Ide Controller) | – | – | – | |||||||
| OPTI | 82C611 | Early 93 | 2 | PIO-3 | Jumper | † Probably programmed the same way as the 82C611A; to be tested (owner) | Opti VIC (VIC = Vesa Ide Controller) | – | – | – | |||||
| OPTI | 82C611A | Late 94 | 2 | PIO-3 | Card | Half | † Jumper + Driver [Jumper] | 0 (slow), 3 (fast). † SETUPVIC: read/write pulse, recovery, address setup in ns; 25/33 MHz | Opti VIC (VIC = Vesa Ide Controller) | 1F3h echoes C0h; then in 1F1h ×2, out 1F2h,03h (config mode), 1F3h changes, out 1F2h,83h |
In config mode: 1F3h selects the drive bank, 1F1h = write timing, 1F6h = setup and read bank, 1F0h = read timing, 1F5h bits 0–1 = bus-clock strap. † Linux pata_legacy 5.15 uses the same sequence for the 82C611A |
optivic.sys 1.0, opti-pio.exe, opti-set.exe (drivers don't name the chip) | |||
| PiC | 1288A-125 | Late 93 | 1 | PIO-2 | Yes | Jumper | 0 (slow), 3 (fast) | Driver Not found yet | VIDE-1 | – | – | – | |||
| Promise | PDC-20230b | Mid 93 | 1 | PIO-3 | Jumper | 0 (slow), 2(fast) | † Works with the PROMISE.SYS 3.3 drivers (owner). † PROMISE.SYS 3.3 supports it (owner) | CompassLab CL3201 (9314) ? † Code name TurboChip B; jumper speeds 0, 1, 2 (Soucek) | † No config mode. Write 55h to 1F2h, read it three times back to back: a 20230-B returns 00h on the third read (Soucek; also unreached code in PROMISE.SYS at 2D3Bh). Needs the same three reads as a "VLB sync" before 32-bit I/O |
– (jumpers) | PROMISE.SYS 3.3 | ||||
| UMC | UM82C871F | Mid 93 | 1 | PIO-3 | Jumper | Best speed: AT:3 RT:4 | † Driver only uses standard IDE commands; its F5 setup only toggles multi-sector mode | – | – | UM82C871F.SYS | |||||
| UMC | UM85C418F | Late 93 | 1 | PIO-2 | † Jumper; driver overrides for 28 listed drives [Jumper] | Best speed: AT:5 RT:9 | Combo IDE & VGA controller. † The driver writes register D1h only when every drive is in its table |
Stability issues at fastest speeds | None: 108h/109h unlocked with 5Ah, no ID read back |
Register D1h through index 108h/data 109h (one value for both drives) |
UM85C418F.SYS 1.07 | ||||
| Winbond | W83759F | Early 94 | 2 | PIO-2 | Jumper | 600ns, 500ns, 400ns, 240ns | winbond_port † (Linux pata_legacy parameter; default base 130h, alternate 1B0h) |
† Same probe as the W83759AF? WBIDE reads a revision letter; DOSEIDE needs revision B or later. Linux only programs the W83759A, after turning off jumper mode (register 81h bit 7). † F = package type (owner) |
? | – | – |