Intel Advanced/EV - Revision history

GL1zdA: Added Socket 7 information

2021-08-18T06:59:16Z

Added Socket 7 information

GL1zdA: Changed image name

2020-12-02T20:37:04Z

Changed image name

GL1zdA: Changed fraction sign to slash

2020-12-02T20:32:13Z

Changed fraction sign to slash

GL1zdA: GL1zdA moved page Intel Advanced∕EV to Intel Advanced/EV: Changed "fraction sign" to slash.

2020-12-02T20:31:30Z

GL1zdA moved page Intel Advanced∕EV to Intel Advanced/EV: Changed "fraction sign" to slash.

GL1zdA: Added information about the integrated audio

2020-09-30T13:52:01Z

Added information about the integrated audio

Schule04: Added details

2016-06-15T21:33:38Z

Added details

Malvineous: Not MB_PRO though

2016-03-20T09:42:49Z

Not MB_PRO though

Malvineous: Update internal audio connectors

2016-03-20T09:42:15Z

Update internal audio connectors

Malvineous: Add back factory memory

2016-03-20T02:15:46Z

Add back factory memory

Malvineous: Omit audio memory

2016-03-20T02:12:43Z

Omit audio memory

@@ Line 74: / Line 74: @@
 }}
-The '''Intel Advanced/EV''' (codename '''Endeavour''') is a Socket 5 Pentium 1 motherboard capable of up to 133MHz operation.  It is also available in Socket 7 variants.
+The '''Intel Advanced/EV''' (codename '''Endeavour''') is a Socket 5 Pentium motherboard capable of up to 133 MHz operation. It is also available in Socket 7 variants supporting the Pentium up to 200 MHz. There's no support for CPUs using dual voltage planes like Pentium MMX, AMD K6 or Cyrix 6x86MX, even though there's an unpopulated section on the motherboard, where a VRM connector could be soldered.
 The board has optional onboard audio (Creative Labs Vibra 16S/[[CT2504]]) with an YMF289(OPL3) and optional onboard video ([[S3 Trio64V+]]). Booting from CD is not possible without a third-party bootloader.
@@ Line 88: / Line 88: @@
 Image:Intel Advanced∕EV audio riser underside.jpg|Audio riser underside
 </gallery>
 == Audio ==
@@ Line 93: / Line 97: @@
 The optional onboard audio is provided by a Creative Labs [[CT2504]] Vibra 16S chip.  While not plug-and-play, the BIOS allows the I/O resources to be configured as needed.
-The rear plugs are provided by a custom riser board that occupies a rear slot.  It does not obscure any ISA or PCI slots as none are present at that position.  Some versions of the riser card have a connector for front panel audio, although it is unknown whether this matches the later standard pinout for front panel audio.
+The rear plugs are provided by a custom riser board that occupies a rear slot.  It does not obscure any ISA or PCI slots, as none are present at that position.  Some versions of the riser card have a connector for front panel audio, although it is unknown whether this matches the later standard pinout for front panel audio.
 If no speakers are connected, the output of the sound card will automatically switch to the built-in PC speaker.

@@ Line 1: / Line 1: @@
 {{Device Infobox/Begin
   | Bus type = PCI
   | Bus width = 32-bit

@@ Line 73: / Line 73: @@
 }}
-The '''Intel Advanced∕EV''' (codename '''Endeavour''') is a Socket 5 Pentium 1 motherboard capable of up to 133MHz operation.  It is also available in Socket 7 variants.
+The '''Intel Advanced/EV''' (codename '''Endeavour''') is a Socket 5 Pentium 1 motherboard capable of up to 133MHz operation.  It is also available in Socket 7 variants.
 The board has optional onboard audio (Creative Labs Vibra 16S/[[CT2504]]) with an YMF289(OPL3) and optional onboard video ([[S3 Trio64V+]]). Booting from CD is not possible without a third-party bootloader.

← Older revision		Revision as of 13:52, 30 September 2020
Line 92:		Line 92:
	The optional onboard audio is provided by a Creative Labs [[CT2504]] Vibra 16S chip. While not plug-and-play, the BIOS allows the I/O resources to be configured as needed.		The optional onboard audio is provided by a Creative Labs [[CT2504]] Vibra 16S chip. While not plug-and-play, the BIOS allows the I/O resources to be configured as needed.

−	The rear plugs are provided by a custom riser board that occupies a rear slot. It does not obscure any ISA or PCI slots as none are present at that position. Some versions of the riser card have a connector for front panel audio, although it is unknown whether this matches the later standard pinout for front panel audio. If no speakers are connected, the output of the sound card will automatically switch to the built-in PC speaker. The board provides very basic power management support: Hard drives and the video output can automatically be powered down after a configured time of inactivity.	+	The rear plugs are provided by a custom riser board that occupies a rear slot. It does not obscure any ISA or PCI slots as none are present at that position. Some versions of the riser card have a connector for front panel audio, although it is unknown whether this matches the later standard pinout for front panel audio.
		+
		+	If no speakers are connected, the output of the sound card will automatically switch to the built-in PC speaker.
		+
		+	=== On-board OPL3 ===
		+
		+	According to the Specification Update document from Intel, the onboard OPL3 can't be disabled.
		+
		+	=== MIDI Upgrade ===
		+
		+	The board has a connector for the optional MIDI upgrade. A SoundBlaster AWE32 Upgrade card (Goldfinch upgrade, CT1920/CT1922) can be used for this upgrade. The on-board Vibra doesn't decode the highest address bits, so you have to configure ports in a non-canonical way (for example 0x220 for the Vibra and 0x640 for the AWE32).
		+
		+	== Power Management ==
		+
		+	The board provides very basic power management support: Hard drives and the video output can automatically be powered down after a configured time of inactivity.

@@ Line 45: / Line 45: @@
   | Max sample rate =
   | Channels = 2
-  | FM synth = CQM
+  | FM synth = OPL3
   | Input/CD = [[Has CD audio input connector::SBCD]]
   | Factory memory = 0 MB
@@ Line 66: / Line 66: @@
   | LPT3 = No
   | LPT4 = No
-  | Game ports = 0
+  | Game ports = 1
 }}
 {{Device Infobox/End
-  | Manual =
+  | Manual = http://www.elhvb.com/mobokive/Archive/Intel/Advanced-EV_28183501.pdf
   | Driver =
 }}
@@ Line 75: / Line 75: @@
 The '''Intel Advanced∕EV''' (codename '''Endeavour''') is a Socket 5 Pentium 1 motherboard capable of up to 133MHz operation.  It is also available in Socket 7 variants.
-The board has optional onboard audio (Creative Labs Vibra 16S/[[CT2504]]) and optional onboard video ([[S3 Trio64V+]]).
+The board has optional onboard audio (Creative Labs Vibra 16S/[[CT2504]]) with an YMF289(OPL3) and optional onboard video ([[S3 Trio64V+]]). Booting from CD is not possible without a third-party bootloader.
 == Additional photos ==
@@ Line 81: / Line 83: @@
 <gallery mode="packed">
 Image:Intel Advanced∕EV underside.jpg|Underside
-Image:Intel Advanced∕EV BIOS.png|CMOS setup (todo)
+Image:Intel Advanced∕EV BIOS.png|CMOS setup (AMIBIOS)
 Image:Intel Advanced∕EV audio riser.jpg|Audio riser top view
 Image:Intel Advanced∕EV audio riser underside.jpg|Audio riser underside
@@ Line 90: / Line 92: @@
 The optional onboard audio is provided by a Creative Labs [[CT2504]] Vibra 16S chip.  While not plug-and-play, the BIOS allows the I/O resources to be configured as needed.
-The rear plugs are provided by a custom riser board that occupies a rear slot.  It does not obscure any ISA or PCI slots as none are present at that position.  Some versions of the riser card have a connector for front panel audio, although it is unknown whether this matches the later standard pinout for front panel audio.
+The rear plugs are provided by a custom riser board that occupies a rear slot.  It does not obscure any ISA or PCI slots as none are present at that position.  Some versions of the riser card have a connector for front panel audio, although it is unknown whether this matches the later standard pinout for front panel audio. If no speakers are connected, the output of the sound card will automatically switch to the built-in PC speaker. The board provides very basic power management support: Hard drives and the video output can automatically be powered down after a configured time of inactivity.

← Older revision	Revision as of 20:31, 2 December 2020
(No difference)

@@ Line 46: / Line 46: @@
   | Channels = 2
   | FM synth = CQM
-  | Factory memory = 0MB
+ | Input/CD = [[Has CD audio input connector::SBCD]]
   | CD interface = [[Has CD interface::None]]
   | CD audio connector = Mini/GLGR