Accton EN1650 - Revision history

Malvineous: Update infobox

2016-02-13T07:11:19Z

Update infobox

Malvineous: Add driver URL

2016-02-05T12:29:42Z

Add driver URL

Malvineous: Basic info

2016-02-03T05:52:44Z

Basic info

New page

{{Ethernet Infobox
| Bus type = ISA
| Bus width = 16-bit
| Bus speed = 8 MHz
| 8-bit ISA compatible =
| Manufacturer = Accton Technology Corporation
| Chipset = EN5020
| Compatible with = [[Has compatibility::NE1000]], [[Has compatibility::NE2000]]
| Connectors = [[Has connector::AUI]], [[Has connector::BNC]], [[Has connector::TP]]
| Is ROM socketed = Yes
| ROM type = 28-pin JEDEC
| Is ROM writable = No
| Requires -5VDC = Unknown
| Requires -12VDC = Unknown
| Config = [[Config method::Software]]
| Driver
}}

The '''Accton EN1650''' is a 10Mbps network card.

== Additional photos ==

<gallery mode="packed">
Image:Accton EN1650 underside.jpg|Underside
Image:Accton EN1650 configuration utility.png|Config utility
Image:Accton EN1650 diagnostics.png|Diagnostics
Image:Accton EN1650 configuration options.png|Config options
</gallery>

== Boot ROM ==

This card's boot ROM socket will take a standard 28-pin ROM chip. It has also been successfully tested with a 32-pin ROM chip using an adapter<ref>[http://sbfmdrv.blogspot.com.au/2015/11/retrofitting-new-eeprom-into-old-pc.html Port 388h - Retrofitting a new EEPROM into an old PC]</ref>. XTIDE will run without any problem.

The card's DOS drivers come with a configuration program (<tt>1STEP.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ.

== Resources ==

* I/O address: 240, 280, 2C0, 300, 320, 340, 360.
* IRQ: 2, 3, 4, 5, 10, 11, 12, 15, Disabled.
* Boot ROM size: 16kB only.
* Boot ROM: C000, C400, C800, CC00, D000, D400 and D800, Disabled.

== References ==

<references/>

@@ Line 1: / Line 1: @@
-{{Ethernet Infobox
+{{Device Infobox/Begin
   | Bus type = ISA
   | Bus width = 16-bit
@@ Line 8: / Line 8: @@
   | Compatible with = [[Has compatibility::NE1000]], [[Has compatibility::NE2000]]
   | Connectors = [[Has connector::AUI]], [[Has connector::BNC]], [[Has connector::TP]]
   | Is ROM socketed = Yes
   | ROM type = 28-pin JEDEC
   | Is ROM writable = No
- | Requires -5VDC = Unknown
+}}
- | Requires -12VDC = Unknown
+{{Device Infobox/End
   | Driver = [http://www.vogonsdrivers.com/getfile.php?fileid=901 Vogonsdrivers]
 }}

@@ Line 14: / Line 14: @@
   | Requires -12VDC = Unknown
   | Config = [[Config method::Software]]
-  | Driver<!-- TODO -->
+  | Driver = [http://www.vogonsdrivers.com/getfile.php?fileid=901 Vogonsdrivers]
 }}