Accton EN1640 - Revision history

Malvineous: Update infobox

2016-02-13T07:09:54Z

Update infobox

← Older revision		Revision as of 17:09, 13 February 2016
Line 1:		Line 1:
	{{~~Ethernet~~ Infobox		{{Device Infobox/Begin
	\| Bus type = ISA		\| Bus type = ISA
	\| Bus width = 16-bit		\| Bus width = 16-bit
Line 8:		Line 8:
	\| Compatible with = [[Has compatibility::NE1000]], [[Has compatibility::NE2000]]		\| Compatible with = [[Has compatibility::NE1000]], [[Has compatibility::NE2000]]
	\| Connectors = [[Has connector::AUI]], [[Has connector::BNC]]		\| Connectors = [[Has connector::AUI]], [[Has connector::BNC]]
			\| Requires -5VDC = No
			\| Requires -12VDC = No
			\| Config = [[Config method::Software]]
			}}
			{{Device Infobox/Ethernet
	\| Is ROM socketed = Yes		\| Is ROM socketed = Yes
	\| ROM type = 28-pin JEDEC		\| ROM type = 28-pin JEDEC
	\| Is ROM writable = No		\| Is ROM writable = No
	~~\| Requires -5VDC = Unknown~~		}}
	~~\| Requires -12VDC = Unknown~~		{{Device Infobox/End
	~~\| Config = [[Config method::Software]]~~
	\| Driver = [http://www.vogonsdrivers.com/getfile.php?fileid=900 Vogonsdrivers]		\| Driver = [http://www.vogonsdrivers.com/getfile.php?fileid=900 Vogonsdrivers]
	}}		}}

Malvineous: Add driver URL

2016-02-04T12:20:04Z

Add driver URL

← Older revision		Revision as of 22:20, 4 February 2016
Line 14:		Line 14:
	\| Requires -12VDC = Unknown		\| Requires -12VDC = Unknown
	\| Config = [[Config method::Software]]		\| Config = [[Config method::Software]]
	\| Driver~~<!-- TODO -->~~		\| Driver = [http://www.vogonsdrivers.com/getfile.php?fileid=900 Vogonsdrivers]
	}}		}}

Malvineous: Add resources and screenshots

2016-01-26T10:24:07Z

Add resources and screenshots

← Older revision		Revision as of 20:24, 26 January 2016
Line 23:		Line 23:
	<gallery mode="packed">		<gallery mode="packed">
	Image:Accton EN1640 underside.jpg\|Underside		Image:Accton EN1640 underside.jpg\|Underside
			Image:Accton EN1640 configuration utility.png\|Config utility
			Image:Accton EN1640 diagnostics.png\|Diagnostics
			Image:Accton EN1640 configuration options.png\|Config options
	</gallery>		</gallery>

Line 30:		Line 33:

	The card's DOS drivers come with a configuration program (<tt>DIAG/SETUP.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ.		The card's DOS drivers come with a configuration program (<tt>DIAG/SETUP.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ.

			== Resources ==

			* I/O address: 0, 20, 40, ... 3A0, 3E0, then the same increments starting at 2000, 4000, 6000, 8000, A000, C000, E000.
			* IRQ: 2, 3, 4, 5, 7, 10, 11, 15, Disabled.
			* Boot ROM size: 16kB, 32kB, 64kB, Disabled.
			* Boot ROM: 8000, 8400, 8800, 8C00, then the same increments starting at 9000, A000, B000, C000, D000, E000 and F000.

	== References ==		== References ==

	<references/>		<references/>

Malvineous: Update infobox

2016-01-24T04:21:06Z

Update infobox

← Older revision		Revision as of 14:21, 24 January 2016
Line 1:		Line 1:
	{{Ethernet Infobox		{{Ethernet Infobox
	\| ~~Card~~ type = 16-bit ~~ISA~~		\| Bus type = ISA
			\| Bus width = 16-bit
			\| Bus speed = 8 MHz
	\| 8-bit ISA compatible = Yes		\| 8-bit ISA compatible = Yes
	\| Manufacturer = Accton Technology Corporation		\| Manufacturer = Accton Technology Corporation

Malvineous: Add connectors

2016-01-23T23:20:28Z

Add connectors

← Older revision		Revision as of 09:20, 24 January 2016
Line 5:		Line 5:
	\| Chipset = EN50903		\| Chipset = EN50903
	\| Compatible with = [[Has compatibility::NE1000]], [[Has compatibility::NE2000]]		\| Compatible with = [[Has compatibility::NE1000]], [[Has compatibility::NE2000]]
			\| Connectors = [[Has connector::AUI]], [[Has connector::BNC]]
	\| Is ROM socketed = Yes		\| Is ROM socketed = Yes
	\| ROM type = 28-pin JEDEC		\| ROM type = 28-pin JEDEC

Malvineous: Update infobox

2016-01-23T13:29:20Z

Update infobox

← Older revision		Revision as of 23:29, 23 January 2016
Line 10:		Line 10:
	\| Requires -5VDC = Unknown		\| Requires -5VDC = Unknown
	\| Requires -12VDC = Unknown		\| Requires -12VDC = Unknown
			\| Config = [[Config method::Software]]
			\| Driver<!-- TODO -->
	}}		}}

Malvineous: Add boot ROM info

2016-01-23T11:26:12Z

Add boot ROM info

← Older revision		Revision as of 21:26, 23 January 2016
Line 19:		Line 19:
	Image:Accton EN1640 underside.jpg\|Underside		Image:Accton EN1640 underside.jpg\|Underside
	</gallery>		</gallery>

			== Boot ROM ==

			This card's boot ROM socket will take a standard 28-pin ROM chip. It has also been successfully tested with a 32-pin ROM chip using an adapter<ref>[http://sbfmdrv.blogspot.com.au/2015/11/retrofitting-new-eeprom-into-old-pc.html Port 388h - Retrofitting a new EEPROM into an old PC]</ref>. XTIDE will run without any problem.

			The card's DOS drivers come with a configuration program (<tt>DIAG/SETUP.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ.

			== References ==

			<references/>

Malvineous: Add underside photo

2016-01-23T10:49:40Z

Add underside photo

← Older revision		Revision as of 20:49, 23 January 2016
Line 13:		Line 13:

	The '''Accton EN1640''' is a 10Mbps network card.		The '''Accton EN1640''' is a 10Mbps network card.

			== Additional photos ==

			<gallery mode="packed">
			Image:Accton EN1640 underside.jpg\|Underside
			</gallery>

Malvineous: Infobox

2016-01-23T10:43:19Z

Infobox

New page

{{Ethernet Infobox
| Card type = 16-bit ISA
| 8-bit ISA compatible = Yes
| Manufacturer = Accton Technology Corporation
| Chipset = EN50903
| Compatible with = [[Has compatibility::NE1000]], [[Has compatibility::NE2000]]
| Is ROM socketed = Yes
| ROM type = 28-pin JEDEC
| Is ROM writable = No
| Requires -5VDC = Unknown
| Requires -12VDC = Unknown
}}

The '''Accton EN1640''' is a 10Mbps network card.