Creative Sound Blaster 32 PnP

From Vogons Wiki
Revision as of 22:35, 21 February 2017 by Malvineous (Talk | contribs) (Mention onboard memory as another difference between SB32 and AWE32)

Jump to: navigation, search
Creative Sound Blaster 32 PnP
There is no image of this device — upload one!
Bus type ISA
Bus width 16-bit
Bus speed 8 MHz
8-bit ISA compatible?
Manufacturer Creative Labs
Chipset CT1749
Compatible with Sound Blaster, 30-pin SIMM
Connectors Mic, Line in, Line out, Speaker out, Gameport
Requires -5VDC? No
Requires -12VDC? Yes
Config method PnP
Audio
Model CT3620
Full duplex Unknown
Max sample rate Unknown
Channels 2
FM synth CQM
Internal
connectors
CD Audio in:SBCD, MPC
PC Speaker in:Dupont-2
Aux in:None
Phone (TAD) in/out:None
Line out:None
SPDIF out:Dupont-2
MB_PRO:Yes
SB Link:No
Factory memory Unknown
Max memory 28MB
29,360,128 B
CD interface IDE
IDE Controller
IDE buses 1
Primary? N
Secondary? Y
Tertiary? Y
Quaternary? Y
ROM type None
Driver Missing download URL

The Sound Blaster 32 PnP is an update to the Sound Blaster 16 with the WavEffects (EMU8000) chip from the AWE32. It is one of the few Creative Labs cards that can take standard 30-pin SIMMs to increase the memory available for MIDI instrument samples.

It is very similar to the Creative Sound Blaster AWE32 PnP (IDE), but with a CT1749 instead of the CT8903 (AWE32) chip. It also has a SPDIF output connector, which the AWE32 does not. The SB32 series also has no onboard memory, while the AWE32 has 512 kB.

Additional photos